1. Вовед
The FNIRSI FPM-02 is a high-precision 3-in-1 environmental monitor designed for measuring illuminance (lux), temperature, and humidity. It features a 2-inch color display for clear data visualization and is suitable for various professional applications including office lighting assessment, horticulture, laboratories, and photography studios.
2. Што има во кутијата
- FNIRSI FPM-02 Environmental Monitor
- USB кабел
- торбичка за носење
- Упатство за употреба
3. Клучни карактеристики
- Мерење 3-во-1: Monitors Lux, temperature, and humidity simultaneously.
- 2-инчен екран во боја: High-definition display with light and dark theme modes for optimal readability.
- Real-time Data & Curve Recording: Visualizes environmental changes over time.
- Adjustable Alarm Thresholds: Alerts users when measurements exceed set values.
- Брзиот Сampling Оценка: 20Hz (50ms) for real-time monitoring.
- Dual-language Interface: Supports English and Chinese.
- Built-in Sleep Mode & Data Logging: Enhances battery efficiency and usage tracking.
Figure 1: FNIRSI FPM-02 Environmental Monitor with key features highlighted on its color screen.
4. Поставување
4.1 Полнење на уредот
- Connect the provided USB cable to the FNIRSI FPM-02's charging port.
- Вклучете го другиот крај од USB кабелот во стандарден USB адаптер за напојување (не е вклучен) или во USB порт на компјутерот.
- The device will indicate charging status on its screen. A full charge typically takes approximately 2-3 hours.
4.2 Вклучување/исклучување
- To power on: Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
- За исклучување: Притиснете и задржете го копчето за вклучување додека уредот не се исклучи.
5. Упатства за работа
5.1 Навигација низ интерфејсот
The FPM-02 features a user-friendly interface with a 2-inch HD color screen. Use the navigation buttons (up, down, left, right, OK/Enter) to move through menus and select options. The device supports both English and Chinese languages, which can be selected in the settings menu.
5.2 Taking Measurements (Illuminance, Temperature, Humidity)
Upon powering on, the device typically defaults to the main measurement screen, displaying real-time values for illuminance (Lux/FC), temperature (°C/°F), and relative humidity (%).
- Осветлување: Ensure the light sensor (located at the top of the device) is unobstructed and pointed towards the light source or area to be measured. The device will display the light intensity in LUX or FC.
- Температура и влажност: The internal sensors continuously monitor ambient temperature and humidity. Allow a few minutes for readings to stabilize after significant environmental changes.
5.3 Real-time Data and Curve Recording
The device can display real-time data and record changes over time, presenting them as a curve. Access this feature through the main menu to visualize trends and fluctuations in environmental conditions.
5.4 Setting Alarm Thresholds
You can set custom alarm thresholds for Lux, temperature, and humidity. If a measured value exceeds or falls below the set threshold, the device will trigger an alert. Refer to the device's settings menu to configure these thresholds.
5.5 Sleep Mode and Data Logging
To conserve battery, the device features a configurable sleep mode. It also includes data logging capabilities, allowing you to store measurement data for later review and analysis. Consult the user manual for detailed instructions on activating and managing these functions.
6. Одржување
- Чистење: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the light sensor and display are kept clean for accurate readings.
- Складирање: Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури. Доколку го складирате подолг период, осигурајте се дека батеријата е делумно наполнета (околу 50%) за да го продолжите нејзиниот век на траење.
- Нега на батеријата: Avoid fully discharging the lithium battery frequently. Recharge the device when the battery level is low.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | Слаба или празна батерија. | Наполнете го уредот користејќи го дадениот USB-кабел. |
| Неточни читања. | Sensor obstructed or dirty; device not calibrated. | Clean sensors. Ensure proper placement. If issues persist, contact support. |
| Екранот не реагира. | Софтверски проблем; екстремна температура. | Restart the device. Ensure operating within specified temperature range. |
8. Технички спецификации
| Параметар | Вредност |
|---|---|
| Број на модел | FPM-02 |
| Опсег на осветлување | 0–1000 / 9999 / 99990 LUX; 10–1000 / 1000 / 10000 FC |
| Резолуција на осветлување | 0.1 LUX (0–1000); 0.1 FC (10–1000) |
| Точност на осветлувањето | ±(3% + 5 LUX) with standard incandescent lamp (2854°K); ±(6% + 5 LUX) for other light sources |
| Sampлинг Време | 20Hz (50ms) |
| Приказ | 2″ HD Color Screen |
| Извор на енергија | 3.7V / 1500mAh Lithium Battery |
| Димензии на уредот | 63 × 28 × 182 мм |
| Тежина | 205 гр |
| Боја | Црно и сино |
| Земја на потекло | Кина |
9. Гаранција и поддршка
This FNIRSI FPM-02 Environmental Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.