SEBSON Outdoor Motion Detector IR_OUT_IA User Manual

1. Вовед

Thank you for choosing the SEBSON Outdoor Motion Detector. This device is designed for reliable outdoor use, featuring an IP65 rating for weather resistance and a 240° infrared sensor. It is programmable for ignition duration, ambient brightness, and detection range, making it suitable for various lighting applications with both incandescent and LED bulbs. This manual provides essential information for safe installation, operation, and maintenance of your motion detector.

Слика 1: напред view of the SEBSON Outdoor Motion Detector, showcasing its compact design and sensor lens.

2. Инструкции за безбедност

Внимателно прочитајте ги овие безбедносни упатства пред инсталација и работа. Непочитувањето на овие упатства може да резултира со електричен удар, пожар или други опасности.

• Електрична инсталација: Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните прописи за ожичување.
• Исклучување на струја: Always disconnect the main power supply before performing any installation, maintenance, or repair work.
• Voltage: Обезбедете снабдување voltage matches the detector's specified voltage (230 волти).
• Употреба на отворено: The device is IP65 rated for outdoor use, protecting against dust and water jets. Ensure all connections are properly sealed.
• Монтирање: Mount the detector securely on a stable wall surface.
• Деца: Држете ги материјалите за пакување и малите делови подалеку од дофат на деца.

3. Производот завршиview

The SEBSON Outdoor Motion Detector features three adjustable dials for precise control over its operation:

• ЛУКС: Adjusts the ambient brightness threshold (3-2000 LUX) at which the detector activates.
• SENS: Controls the detection range (8-14 meters).
• ВРЕМЕ: Sets the duration (10 seconds to 15 minutes) for which the connected light remains on after motion is detected.

Слика 2: Крупен план view of the three adjustment dials (LUX, SENS, TIME) located on the underside of the motion detector.

4. Поставување и инсталација

4.1 Монтирање на детекторот

The motion detector is designed for wall surface mounting. Choose a stable location that provides the desired detection coverage and is within the recommended mounting height.

1. Disconnect the main power supply before starting installation.
2. Separate the mounting base from the main unit.
3. Mark the drilling points on the wall using the mounting base as a template.
4. Дупчете дупки и вметнете соодветни ѕидни приклучоци (доколку е потребно).
5. Secure the mounting base to the wall using screws. Ensure the 'UP' arrow on the base points upwards.

Слика 3: Задна страна view of the mounting base, showing the 'UP' indicator and screw holes for wall attachment.

Image 4: Diagram illustrating the width of the mounting plate, which is 60 mm.

4.2 Wици

This motion detector uses a 3-wire connection. Ensure all wiring is done with the power supply disconnected.

• Connect the Live (L) wire from the power supply to the 'L' terminal on the detector.
• Connect the Neutral (N) wire from the power supply to the 'N' terminal on the detector.
• Connect the Switched Live (L') wire from the detector to the Live terminal of your light fixture.
• Connect the Neutral wire from the power supply to the Neutral terminal of your light fixture.
• Осигурајте се дека сите врски се цврсто затворени и правилно изолирани.

4.3 Размислувања за сместување

Optimal performance depends on correct placement:

• Висина на монтирање: The recommended mounting height is between 1.80 meters and 2.50 meters for optimal detection.
• Област за откривање: The sensor has a 240° detection angle and a range of 8-14 meters. Position it to cover the desired area without unnecessary triggers.
• Избегнувајте опструкции: Do not mount the detector near large objects, trees, or walls that could obstruct the detection field.
• Фактори на животната средина: Avoid mounting near direct sunlight, heat sources (e.g., vents, outdoor units), or areas with constant movement (e.g., busy roads) to prevent false triggers.

Image 5: Detection area diagram, showing the 240° angle, maximum 14m range, and recommended mounting height of 1.80m to 2.50m.

Слика 6: Страна view dimensions of the motion detector, indicating a length of 99mm and a height of 61mm.

5. Упатства за работа

After installation, restore power and adjust the settings using the three dials on the underside of the detector (refer to Image 2).

• LUX (Ambient Brightness): Turn the dial towards the 'sun' symbol for activation in brighter conditions (up to 2000 LUX) or towards the 'moon' symbol for activation only in darker conditions (down to 3 LUX).
• TIME (Ignition Duration): Rotate the dial to set how long the light remains on after motion is detected. Settings range from 10 seconds to 15 minutes.
• SENS (Detection Range): Adjust this dial to control the sensitivity and effective detection distance, from 8 meters to 14 meters. Test different settings to find the optimal range for your environment.

Тестирање: It is recommended to test the detector's settings during both day and night to ensure it operates as desired. You can set the LUX to maximum (sun symbol) for daytime testing of range and time duration, then adjust it to the desired ambient light level for normal operation.

6. Одржување

The SEBSON Outdoor Motion Detector requires minimal maintenance.

• Чистење: Periodically wipe the sensor lens and housing with a soft, damp крпа за отстранување на прашина и нечистотија. Не користете абразивни средства за чистење или растворувачи.
• Инспекција: Regularly check the detector for any signs of damage, loose connections, or wear.
• Опструкции: Ensure no new obstructions (e.g., growing plants, debris) are blocking the sensor's field of view.

7 Смена на проблеми

If you experience issues with your motion detector, refer to the following common problems and solutions:

Ако проблемот продолжи откако ќе ги испробате овие решенија, контактирајте ја службата за корисници или квалификуван електричар.

8. Спецификации

Technical specifications for the SEBSON Outdoor Motion Detector IR_OUT_IA:

9. Гаранција и поддршка

За информации за гаранцијата и поддршка на клиентите, ве молиме погледнете ја документацијата што е доставена со вашата нарачка или контактирајте го вашиот продавач. Зачувајте го доказот за купување за какви било рекламации во врска со гаранцијата.