AUXITO T5 Portable Jump Starter User Manual

1. Вовед

Thank you for choosing the AUXITO T5 Portable Jump Starter. This device is designed to provide a reliable solution for jump-starting 12V vehicles, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Информации за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреда или оштетување на уредот и возилото:

• Не обидувајте се да стартувате замрзната батерија со електричен чек.
• Уверете се дека стартерот за скокање е целосно наполнет пред употреба.
• Поврзете го clamps correctly: red to positive (+), black to negative (-). Reverse polarity can cause damage.
• Не допирајте го црвено-црниот clampе заедно.
• Чувајте го уредот подалеку од деца.
• Не го изложувајте уредот на екстремни температури, директна сончева светлина или вода.
• Не го расклопувајте уредот. За сите сервиси обратете се на квалификуван персонал.
• Носете заштита за очи кога работите со акумулатори на возила.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• AUXITO T5 Jump Starter
• Smart Jumper Clamps
• USB-A кабел
• Кабел тип-C
• Случај за складирање
• Упатство за употреба

Image: The AUXITO T5 Jump Starter, smart jumper clamps, USB-A cable, Type-C cable, storage case, and user manual are included in the box.

4. Карактеристики на производот

4.1. Powerful Jump Starting Capability

The AUXITO T5 provides 9500A peak current, capable of jump-starting 12V vehicles, including all gas and 12L diesel engines, up to 80 times on a single charge.

Image: The AUXITO T5 Jump Starter displaying 100% charge, highlighting its 9500A power for 12V vehicles.

4.2. PD 30W Fast Charging

Equipped with PD 30W USB-C input/output for rapid charging of the jump starter itself and other compatible devices.

• 5W Charger: Approximately 18 hours to full charge.
• 18W Charger: Approximately 7 hours to full charge.
• 30W Charger: Approximately 2.5 hours to full charge.

Image: The AUXITO T5 Jump Starter showing the USB-C port for PD 30W fast charging, with a table indicating charge times for different charger ratings.

4.3. Informative LCD Screen

The large LCD screen displays essential information such as battery percentage, readiness status (READY), low battery warning (LOW), reverse polarity warning (RC), and temperature alerts.

Image: A close-up of the AUXITO T5 Jump Starter's LCD screen, showing 100% battery and 'READY' status, along with indicators for low battery, reverse connection, and temperature.

4.4. 168W DC Output

Provides a 168W DC output (15V/10A) to continuously charge 12V appliances such as air pumps, vacuum cleaners, and car refrigerators.

Image: The AUXITO T5 Jump Starter connected to a car accessory via its DC output port, demonstrating its ability to power 12V appliances.

4.5. Built-in Boost Mode

Features a boost mode to start deeply discharged or dead batteries quickly and safely.

Image: A hand pressing the 'START' button on the AUXITO T5 Jump Starter, indicating the activation of boost mode for jump-starting a vehicle battery.

4.6. 20000 mAh Power Bank

With a 20000 mAh capacity, the device can charge multiple electronic devices via its USB-C (PD 30W), USB-1 (18W), and USB-2 (18W) ports, functioning as a 74W high-capacity power bank.

Image: The AUXITO T5 Jump Starter connected to and charging multiple devices, including a smartphone and earbuds, demonstrating its power bank functionality.

4.7. 1000 Lumen Emergency Light

Integrated 1000 lumen LED light with multiple modes: Lighting Mode, Flashing Mode, and SOS Mode for emergency situations.

Image: The AUXITO T5 Jump Starter's built-in 1000 lumen emergency light illuminating a dark surface, with icons for Lighting, Flashing, and SOS modes.

5. Setup: Charging the Jump Starter

Before first use, fully charge the AUXITO T5. It is recommended to recharge the device every 3-6 months to maintain battery health.

1. Connect the provided Type-C cable to the USB-C IN/OUT (PD 30W) port on the jump starter.
2. Connect the other end of the Type-C cable to a compatible USB wall charger (not included). For fastest charging, use a 30W PD charger.
3. The LCD screen will display the charging progress. The device is fully charged when the screen shows 100%.

6. Упатства за работа

6.1. Палење на возило со џебови

Ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

1. Connect the Smart Jumper Clamps: Insert the blue plug of the smart jumper clamps into the jump starter's jump start port. Ensure a firm connection.
2. Поврзување со батеријата на возилото:
   • Прикачете го црвена (+) клamp to the vehicle battery's positive (+) terminal.
   • Прикачете го црно (-) клоamp to the vehicle battery's negative (-) terminal.
3. Check LCD Screen: The LCD screen should display 'READY' if the connections are correct and the battery is ready for a jump. If 'RC' (Reverse Connection) or other error indicators appear, disconnect and re-connect the clampе правилно.
4. Стартувајте го возилото: Once 'READY' is displayed, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
5. Activate Boost Mode (if needed): If the vehicle battery is deeply discharged and the 'READY' indicator does not appear, press and hold the 'START' button on the jump starter for 3 seconds to activate Boost Mode. The screen will show 'BOOST'. Attempt to start the vehicle within 30 seconds.
6. Исклучете го Clamps: Откако ќе се запали возилото, веднаш исклучете го црниот (-) спојник.amp прво, потоа црвениот (+) clamp, and finally unplug the smart jumper clamps од скок стартерот.

6.2. Користење како Power Bank

The AUXITO T5 can charge various electronic devices.

1. Connect your device's charging cable to one of the available output ports: USB-C IN/OUT (PD 30W), USB-1 (18W), or USB-2 (18W).
2. The jump starter will automatically begin charging your device. The LCD screen will show the remaining battery percentage.

6.3. Using the Emergency Light

The built-in LED light offers three modes for different situations.

1. Вклучи/исклучи: Press and hold the light button for 3 seconds to turn the LED light on or off.
2. Префрли режими: While the light is on, short press the light button to cycle through the modes: Lighting Mode > Flashing Mode > SOS Mode.

7. Одржување и складирање

• Store the jump starter in a cool, dry place, away from direct sunlight and moisture.
• Recharge the device every 3-6 months to maintain optimal battery performance, even if not in use.
• Чистете го уредот со мека, сува крпа. Не користете груби хемикалии или абразивни материјали.
• Чувајте ги портите чисти од прашина и остатоци.

8 Смена на проблеми

• Уредот не се вклучува: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the screen activates.
• Возилото не се пали:
  • Check that the smart jumper clamps are securely connected to both the jump starter and the vehicle battery terminals (red to positive, black to negative).
  • Ensure the jump starter has sufficient charge (at least 50%).
  • If the battery is deeply discharged, try using the Boost Mode.
  • The vehicle battery might be severely damaged and require professional service.
• 'RC' (Reverse Connection) displayed: Исклучете го clamps immediately and re-connect them to the correct battery terminals (red to positive, black to negative).
• 'LOW' displayed: The jump starter's battery is low. Recharge the device before attempting to jump-start a vehicle or charge other devices.
• Temperature warning displayed: The device is either too hot or too cold. Move it to a suitable environment and allow it to reach an optimal operating temperature before use.

9. Спецификации

10. Гаранција и поддршка

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AUXITO webНе обидувајте се сами да го поправите уредот, бидејќи тоа може да ја поништи гаранцијата.