1. Вовед
Thank you for choosing the NATFIRE A07 Smart Bike Tail Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new tail light. Please read this manual thoroughly before use to ensure optimal performance and safety.
The NATFIRE A07 is designed to enhance your cycling safety with its advanced features, including smart brake sensing, USB-C recharging, and multiple lighting modes. Its robust, weather-resistant design ensures reliable performance in various conditions.
2. Информации за безбедност
- Секогаш осигурајте се дека задното светло е безбедно монтирано пред возење.
- Do not look directly into the light when it is on, as it may cause temporary vision impairment.
- Чувајте го уредот подалеку од деца.
- Do not disassemble or attempt to repair the light yourself. Contact customer support for assistance.
- Ensure the USB-C port cover is properly sealed after charging to maintain water resistance.
- This light is designed to increase visibility; it does not replace the need for safe cycling practices.
3. Содржина на пакетот
Ве молиме проверете го пакувањето за следните ставки:
- NATFIRE A07 Smart Bike Tail Light
- Mounting Bracket (Slant or Seat Bracket, depending on variant)
- Silicone Strap (for Slant Bracket)
- USB-C кабел за полнење
- Упатство за употреба
4. Производот завршиview
The NATFIRE A07 Smart Bike Tail Light features a compact design with advanced functionalities to enhance your visibility on the road.
Клучни карактеристики:
- Паметно сензорирање на сопирачките: Automatically detects deceleration and activates a brighter brake light.
- USB-C за полнење: Практично и брзо полнење.
- Батерија од 800 mAh: Обезбедува продолжено време на работа.
- 100LM Ultra Bright: High visibility output.
- Водоотпорен IPX5: Отпорен на прскање на вода од која било насока.
- Разновидна монтажа: Supports both horizontal and vertical installation.
- Automatic Sleep/Wake-up: Conserves battery by entering sleep mode when stationary and waking up upon movement.
Компоненти:
Refer to the image below for a visual representation of the tail light's components.
The tail light unit includes a power button on the top, a USB-C charging port on the side, and a mounting interface on the bottom for attaching to the bracket.
This image illustrates the primary features of the A07 tail light, including its automatic brake light function, high brightness, USB-C charging capability, water resistance, battery capacity, and flexible mounting options.
5. Полнење
Before first use, fully charge the NATFIRE A07 tail light.
- Locate the USB-C charging port on the side of the tail light.
- Open the rubber cover protecting the USB-C port.
- Connect the provided USB-C cable to the tail light and the other end to a USB power source (e.g., computer, wall adapter).
- Индикаторската ламбичка ќе го покаже статусот на полнење (на пр., црвена за полнење, зелена за целосно наполнето).
- Откако целосно ќе се наполни, исклучете го кабелот и цврсто затворете го гумениот капак за да ја одржите водоотпорноста.
6. Поставување и инсталација
The NATFIRE A07 offers flexible installation options for various bicycle setups.
This image details two primary installation methods: using a slant bracket with a silicone strap for the seatpost, and a seat bracket for mounting under the saddle rails.
6.1. Slant Bracket Installation (for Seatpost)
- Attach the silicone strap to the seatpost.
- Fasten the silicone strap securely around the seatpost.
- Install the tail light onto the base of the slant bracket.
- The light can be installed horizontally or vertically on the bracket.
6.2. Seat Bracket Installation (for Saddle Rails)
- Buckle the strap of the seat bracket, fixing it onto the seat rail track.
- Install the tail light onto the bracket.
- The light can be installed horizontally or vertically on the bracket.
7. Упатства за работа
The NATFIRE A07 features intuitive controls for power and mode selection.
This diagram illustrates the various operational modes and smart features of the A07 tail light, including how brake sensing, automatic sleep, and auto wake-up functions work, along with the available running light modes.
7.1. Вклучување/исклучување
- За вклучување: Press and hold the power button (located on the top of the light) for approximately 2 seconds.
- За исклучување: Притиснете и задржете го копчето за вклучување приближно 2 секунди.
7.2. Избор на режим
With the light powered on, short press the power button to cycle through the available lighting modes:
- Running Light Mode 1: Standard steady light.
- Running Light Mode 2: Another steady light pattern or intensity.
- Двојно трепкање: A distinct flashing pattern for increased visibility.
7.3. Паметни функции
- Automatic Brake Light: When the light detects deceleration (braking), it will automatically switch to a brighter strobe for approximately 5 seconds to alert following traffic.
- Автоматско спиење: If the light is on and no movement is detected for a period (e.g., when you stop cycling), it will enter a sleep mode to conserve battery.
- Автоматско будење: When movement or shock is detected while in sleep mode, the light will automatically turn on and resume its last active mode.
8. Одржување
- Чистење: Избришете ја светлината со мека, гamp крпа. Не користете абразивни средства за чистење или растворувачи.
- Складирање: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery every 3-6 months to prolong its lifespan.
- Отпорност на вода: Ensure the USB-C port cover is always securely closed to maintain the IPX5 water resistance rating.
9 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува | Слаба батерија Копчето за вклучување не е правилно притиснато | Наполнете ја светилката целосно Притиснете и задржете го копчето за вклучување 2 секунди |
| Светлината не се полни | Неисправен кабел или извор на енергија USB-C port obstructed | Пробајте друг USB-C кабел и извор на напојување Check the USB-C port for debris |
| Чувството на сопирачките не работи | Light not securely mounted Sudden deceleration not detected | Ensure the light is firmly attached to the bracket and bike Brake sensing activates with significant deceleration, not minor speed changes |
| Auto sleep/wake-up not functioning | Constant minor vibrations Feature disabled (if applicable) | Ensure the bike is completely stationary for auto-sleep to activate Refer to operating instructions for feature activation |
10. Спецификации
- Модел: A07
- Производител: YHNNH
- Капацитет на батеријата: 800 mAh
- Осветленост: 100 лумени (LM)
- Порта за полнење: USB-C
- Водоотпорна оцена: IPX5
- Тежина: Приближно 50 гр
- Димензии: Approximately 1 x 1 x 1 cm (Parcel Dimensions, actual product may vary slightly)
- Монтирање: Хоризонтална и вертикална
11. Гаранција и поддршка
The NATFIRE A07 Smart Bike Tail Light comes with a standard manufacturer's warranty. Please refer to the product packaging or contact your retailer for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
