1. Вовед
The Marstek Venus E GEN 3.0 is a powerful and flexible AC energy storage system designed for residential and small commercial applications. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before installation and use.
Key features include a compact design, integrated Plug & Play technology for quick setup, dedicated LAN port for stable communication, and expandability up to 7.5 kW power and 15.36 kWh storage capacity. It also offers an integrated backup power output of up to 2,500 W during outages and is 100% compatible with existing PV installations.
Слика 1: Во текот наview of Marstek Venus E GEN 3.0 key features, including new design, PV system compatibility, stable LAN connection, expandability, MARSTEK Intelligence, 2500W on-grid input/output, 6000+ life cycles, 10-year warranty, grid feed-in with smart meter, and potential annual savings.
2. Инструкции за безбедност
Always adhere to the following safety guidelines to prevent injury, damage to the device, or property damage:
- Прочитајте ги сите упатства пред да ракувате со уредот.
- Do not attempt to disassemble, repair, or modify the unit. Refer all servicing to qualified personnel.
- Обезбедете соодветна вентилација околу уредот. Не блокирајте ги отворите за вентилација.
- Држете го уредот подалеку од вода, влага и запаливи материјали.
- Користете само обезбедени или одобрени додатоци.
- Не го користете уредот ако е оштетен на кој било начин.
- Ensure the unit is installed on a stable, level surface.
- This device contains a LiFePO4 battery. Handle with care and dispose of according to local regulations.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- Marstek Venus-E GEN 3.0 Unit
- AC кабел за напојување
- Антена за Wi-Fi
- Додатоци за монтирање
- Упатство за употреба (овој документ)
4. Поставување
4.1 Отпакување и поставување
Carefully remove the Venus E GEN 3.0 from its packaging. Place the unit on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient clearance for air circulation around the unit.
Слика 2: Заден дел view of the Marstek Venus E GEN 3.0, highlighting the ventilation fins for optimal heat dissipation.
4.2 Поврзување со напојување
- Connect the provided AC power cable to the AC input port on the Venus E GEN 3.0.
- Plug the other end of the AC power cable into a grounded wall outlet.
- The unit will automatically begin charging or enter standby mode.
Слика 3: Side panel of the Marstek Venus E GEN 3.0, showing the protective cover open to reveal the AC input and output ports for connecting to the grid and appliances.
4.3 Network Connection (LAN/Wi-Fi)
For optimal performance and smart features, connect the device to your home network.
- LAN врска: For a stable and faster connection, use an Ethernet cable to connect the dedicated LAN port on the Venus E GEN 3.0 to your router.
- Wi-Fi конекција: Attach the provided Wi-Fi antenna to the designated port. Follow the instructions in the MARSTEK app to configure the Wi-Fi connection.
4.4 Почетно вклучување
Press and hold the power button on the unit for a few seconds until the indicators light up. The unit will perform a self-check. Refer to the display indicators for status.
Слика 4: Front panel of the Marstek Venus E GEN 3.0, displaying LED indicators for WARN, GRID, BACKUP, BATTERY level, CT, WIFI, and BT status.
5. Упатства за работа
5.1 MARSTEK App Control
The Venus E GEN 3.0 is primarily controlled via the MARSTEK mobile application. Download the app from your device's app store.
- Install the MARSTEK app on your smartphone.
- Регистрирајте сметка и најавете се.
- Follow the in-app instructions to add your Venus E GEN 3.0 device.
- Through the app, you can monitor energy flow, battery status, and select operating modes.
5.2 Работни режими
The MARSTEK app offers various operating modes to optimize energy usage:
- Self-Consumption Mode: Prioritizes using stored energy from the battery or solar panels before drawing from the grid.
- Manual Control Mode: Allows direct control over charging and discharging times.
- AI Optimized Mode: Utilizes dynamic electricity tariffs, consumption habits, and weather forecasts to automatically optimize charge/discharge cycles for maximum savings.
5.3 Backup Power Function
Во случај на моќ outage, the integrated backup output provides up to 2,500 W of power to essential appliances. For full home backup (single-phase or three-phase), additional equipment may be required.
Слика 5: Schematic illustrating a single-phase backup system configuration, showing how multiple Marstek Venus E GEN 3.0 units can be integrated with a Smart Box and the grid to provide backup power to household loads.
Слика 6: Schematic illustrating a three-phase backup system configuration, detailing the connection of multiple Marstek Venus E GEN 3.0 units, a Smart Box, PV inverters, and micro-inverters to the grid and household backup loads.
6. Одржување
Regular maintenance ensures the longevity and optimal performance of your Venus E GEN 3.0.
- Чистење: Користете мека, сува крпа за чистење на надворешноста на уредот. Не користете течни средства за чистење или растворувачи.
- Вентилација: Периодично проверувајте дали отворите за вентилација се без прашина и остатоци.
- Ажурирања на фирмверот: Ensure the MARSTEK app and device firmware are kept up-to-date for new features and performance improvements.
- Здравје на батеријата: The LiFePO4 battery is designed for over 6,000 charge cycles. Monitor its health via the MARSTEK app.
Слика 7: The Marstek Venus E GEN 3.0 demonstrating its robust design and IP65 protection, suitable for operation in various environmental conditions, including snow and rain.
7 Смена на проблеми
Доколку наидете на проблеми, погледнете ги следните вообичаени проблеми и решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | No power from AC outlet; power cable not connected; unit fault. | Check AC power connection; ensure outlet is functional; contact support if problem persists. |
| Нема мрежна врска. | Wi-Fi antenna not attached; incorrect Wi-Fi password; LAN cable disconnected; router issue. | Ensure Wi-Fi antenna is attached; re-enter Wi-Fi password in app; check LAN cable connection; restart router. |
| Батеријата не се полни. | AC input issue; charging mode not active; temperature outside operating range. | Verify AC input; check app for charging mode; ensure ambient temperature is within -20°C to 50°C. |
| Backup power not activating. | Backup function not enabled; battery low; overload. | Ensure backup mode is enabled in app; check battery level; reduce load on backup output. |
For issues not listed here, please contact Marstek customer support.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | MVE3 |
| Димензии (Д x Ш x В) | 62.4 x 48 x 15.3 cm |
| Тип на батерија | LiFePO4 |
| Капацитет | 5120 Wh (extensible up to 15.36 kWh) |
| AC Input/Output Power | Up to 2500 W (800 W default) |
| Backup Power Output | До 2500 W |
| Поврзување | LAN (RJ45), Wi-Fi |
| Работна температура | Up to -20 °C |
| Ниво на бучава | Под 30 dB |
| Оценка за заштита | IP65 |
| PV System Compatibility | 100% компатибилен |
9. Гаранција и поддршка
9.1 Информации за гаранцијата
The Marstek Venus E GEN 3.0 comes with a 10 година гаранција on the integrated LiFePO4 battery, ensuring long-term reliability with over 6,000 charge cycles while maintaining 80% capacity. Please retain your proof of purchase for warranty claims.
9.2 Поддршка за корисници
For technical assistance, warranty claims, or further inquiries, please contact Marstek customer support through their official website or the MARSTEK app. Ensure you have your model number (MVE3) and purchase details ready.
Службен Webсајт: www.marstek.com (Забелешка: Ова е резервирано место URL, please refer to your product documentation for the actual support webсајт.)
