Вовед
This manual provides essential information for the safe and effective installation, operation, and maintenance of your GEYA G2R 2P 63A AC110V Automatic Transfer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
Информации за безбедност
ПРЕДУПРЕДУВАЊЕ: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before working on the switch.
- Обезбедете оценет voltage and current of the switch match your application.
- Секогаш следете ги локалните електрични кодови и прописи.
- Не го вклучувајте прекинувачот ако изгледа оштетен.
- The input power supply must be connected in the correct phase sequence.
Производот завршиview
The GEYA G2R Automatic Transfer Switch (ATS) is designed to ensure an uninterruptible power supply by automatically switching between a main power source and a backup power source. It features both automatic and manual operation modes and is suitable for DIN rail mounting.
Клучни карактеристики:
- Оценета струја: 63 А
- Оценето волtage: AC 110V
- Работа со двоен режим: Автоматско и рачно
- Fast Switching: Millisecond-level transfer time (within 50ms)
- Монтирање: DIN Rail and Screw Mounting System
- Материјал: High-quality PA6 material with 94V-2 flame retardant grade
Димензии на производот:
Слика: Напред и од страна views of the GEYA G2R Automatic Transfer Switch with detailed dimensions in millimeters. The unit measures 108mm in height, 50.5mm in width (2P version), and 70mm in depth.
Поставување и инсталација
The GEYA G2R ATS supports both DIN rail mounting and screw mounting for flexible installation. Ensure the mounting location is dry, well-ventilated, and free from excessive vibration.
Инструкции за поврзување:
Refer to the wiring diagram below for correct connection. It is crucial that the input power supply is connected in the correct phase sequence.
Image: Detailed wiring diagram for the GEYA G2R ATS. It illustrates connections for backup power neutral wire (1), common power neutral wire (2), common power supply (3), backup power supply (4), load power (5), load output neutral wire (6), DIN-Rail buckle (7), backup power live wire (8), common power live wire (9), closing indication (10), manual operation handle (11), and load output live wire (12). A note emphasizes correct phase sequence for input power.
Voltagд Избор:
Изберете го соодветниот волtage model for your system. This model is designed for AC 110V systems. Using an incorrect voltage can damage the control circuit.
Слика: Томtage selection guide for GEYA G2R ATS. It shows two configurations: G2R-2P-63A-220V for 220/400V systems or one L line 220V, and G2R-2P-63A-110V for 110/220V systems or one L line 110V. A warning advises choosing the correct voltage to prevent coil damage.
Упатства за работа
Начини на работа:
- Автоматски режим: The switch automatically detects power failures in the main source (I) and transfers the load to the backup source (II) within 50 milliseconds. When the main power is restored, it automatically switches back.
- Рачен режим: Use the manual operation handle to select and switch between power sources I and II.
Статус на светлото на индикаторот:
- When the power supply is under voltage или overvoltage, the indicator light flashes (flashes every two seconds).
- When the power is cut off, the indicator light goes out.
- Green indicator light constantly on: Main power supply is active.
- Red indicator light constantly on: Backup power supply is active.
Видео за демонстрација на операцијата:
Video: This video demonstrates the operation of the GEYA ATS, showing how to switch between manual and automatic modes, and how the device automatically transfers power when the main supply is interrupted or restored. It illustrates the indicator light behavior during different power states.
Одржување
The GEYA G2R ATS is designed for durability with a mechanical life of ≥8000 times and an electrical life of ≥1500 times. Regular maintenance is minimal but important for optimal performance.
- Периодично проверувајте ги сите жичени врски за да се осигурате дека се безбедни и без корозија.
- Чувајте го уредот чист и без прашина и остатоци.
- Test the automatic transfer function periodically by simulating a main power failure (if safe to do so and with appropriate precautions).
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Switch does not transfer automatically. | Incorrect mode selection (manual instead of auto). Неисправен извор на енергија. Control circuit issue. | Ensure the switch is set to "Auto" mode. Check both main and backup power sources. Consult qualified electrician. |
| Показните светла не функционираат. | Нема струја на единицата. Неисправност на LED диоди. | Verify power supply connections. Contact support if power is present but lights are off. |
| Overvoltage/Undervoltage indication (flashing light). | Влез волtage outside normal operating range. | Check the stability of your power sources. The unit will automatically recover after 30 seconds if voltage се враќа во нормала. |
Спецификации
| Параметар | Вредност |
|---|---|
| Оценета струја | 63 А |
| Номинална изолација Voltage | 690V |
| Оценето волtage | AC 110V |
| Номинална фреквенција | 50/60 Hz |
| Rated Short-Circuit Current | 5КА |
| Механички живот | ≥ 8000 пати |
| Електричен живот | ≥ 1500 пати |
| Одделение за отпорност на пламен | 94V-2 |
| Тип на монтирање | Монтирање на шина DIN |
| Број на Полјаци | 2 |
| Број на модел на ставка | IG-G2R-2P-63A-AC110V |
| Димензии на пакетот | 4.84 x 3.43 x 2.2 инчи; 13.44 унци |
Гаранција и поддршка
За информации за гаранцијата или техничка поддршка, ве молиме обратете се до официјалниот контакт на производителот. website or contact your point of purchase. Keep your purchase receipt for warranty claims.
Manufacturer: GEYA
За понатамошна помош, посетете ја Продавница GEYA на Amazon.
