Упатство за користење на паметен WiFi прекинувач TOMZN TOB15-63

1. Вовед

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your TOMZN TOB15-63 WiFi Smart Circuit Breaker. This device is designed to offer advanced electrical protection and remote control capabilities for various applications, including solar systems and general electrical circuits. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Опасност од електричен удар. Инсталацијата и сервисирањето треба да ги врши само квалификуван персонал.

• Always disconnect power before installing or servicing the circuit breaker.
• Осигурајте се дека сите инсталации се во согласност со локалните и националните електрични кодови.
• Не го користете уредот ако изгледа оштетен.
• This device is designed for indoor use or in enclosures that protect it from direct weather exposure.
• Потврдете го точниот томtage and current ratings before connecting to any circuit.

3. Карактеристики на производот

• Далечински управувач: Manage power ON/OFF via the Ewelink application.
• Над/Под Voltagд Заштита: Automatically disconnects power when voltage exceeds or falls below adjustable thresholds.
• Current Limiting Protection: Prevents damage from overcurrent by disconnecting power when current exceeds an adjustable limit.
• LCD дисплеј: Приказ во реално време на томtage и струја.
• Прилагодливи параметри: User-configurable settings for over-voltagд, под-волtage, current limit, and delay-on time.
• Издржлива конструкција: Made with insulating, flame-retardant, and UV-resistant materials for long-term reliability.
• Безбедни врски: Терминалите од типот на завртка обезбедуваат стабилни електрични врски.
• Разновидна апликација: Suitable for solar inverters, charge controllers, battery banks, and general circuit protection.

4. Спецификации

5. Инсталација

The TOMZN TOB15-63 WiFi Smart Circuit Breaker is designed for DIN rail mounting within an electrical panel or suitable enclosure. Ensure the installation environment is dry and protected from direct sunlight and extreme temperatures.

1. Исклучување на струја: Before starting, ensure the main power supply to the circuit is completely disconnected at the source. Use a voltagтестер за да потврди дека нема струја.
2. Монтирање: Securely mount the circuit breaker onto a standard DIN rail in your electrical panel.
3. Жици:
   • Connect the incoming live (L) and neutral (N) wires to the designated input terminals (usually marked 'IN' or with arrows pointing inwards).
   • Connect the outgoing live (L) and neutral (N) wires to the designated output terminals (usually marked 'OUT' or with arrows pointing outwards).
   • Ensure all connections are tight and secure using the screw-type terminals. Loose connections can cause overheating and fire hazards.
4. Верификација: Двојно проверете ги сите жичени врски за исправност и безбедност.
5. Вратете ја моќноста: Откако ќе заврши инсталацијата и ќе се потврди, вратете го напојувањето во струјното коло.

Слика 1: Предна страна view of the TOMZN TOB15-63 WiFi Smart Circuit Breaker. This image shows the main switch, LCD display, 'SET' button, and up/down navigation buttons. The display shows "2.3.8.U" and the text "ON/OFF Press 5s to Pairing network" is visible below the navigation buttons.

6. WiFi and Ewelink App Setup

To utilize the smart features of your circuit breaker, you need to connect it to your WiFi network via the Ewelink application.

1. Download Ewelink App: Download and install the Ewelink app from your smartphone's app store (iOS or Android).
2. Регистрација/Најава: Отворете ја апликацијата и регистрирајте нова сметка или најавете се со постоечка.
3. Влезете во режим на спарување: With the circuit breaker powered on, press and hold the "ON/OFF" button (located below the navigation buttons, as shown in Figure 1) for approximately 5 seconds until the WiFi indicator light starts blinking rapidly. This indicates the device is in pairing mode.
4. Додај уред во апликацијата: In the Ewelink app, tap the "+" icon to add a new device. Follow the on-screen instructions to select the device type (e.g., "Electrical Switch" or "Circuit Breaker") and connect it to your 2.4GHz WiFi network.
5. Потврда: Once successfully paired, the WiFi indicator light on the circuit breaker will become solid, and the device will appear in your Ewelink app. You can now rename the device and control it remotely.

7. Операција

7.1. Рачна контрола

• Главен прекинувач: The red lever on the left side of the device (Figure 1) acts as a manual ON/OFF switch for the circuit. Push it up to turn ON, and down to turn OFF.

7.2. LCD екран и навигација

The LCD display shows real-time electrical parameters. It typically cycles between displaying voltage (V) и струја (A).

Слика 2: Аголна view of the TOMZN TOB15-63 WiFi Smart Circuit Breaker. This image highlights the LCD display showing "2.3.8.U" and text indicating adjustable over/under voltage and current limiting values, and that current and voltage display in turn.

• Копче SET: Press the 'SET' button to cycle through different display modes or to enter parameter adjustment mode.
• Копчиња горе/долу: Use the up and down arrow buttons to navigate through menu options or adjust parameter values when in adjustment mode.

7.3. Прилагодување на параметрите

To adjust protection parameters (over-voltagд, под-волtage, current limit, delay-on time):

1. Press and hold the 'SET' button for a few seconds until the display enters parameter adjustment mode.
2. Use the 'SET' button to cycle through the adjustable parameters (e.g., Over Voltage, Под томtage, Current Limit, Delay Time).
3. When the desired parameter is displayed, use the Up and Down arrow buttons to adjust its value.
4. After setting the value, press 'SET' again to confirm and move to the next parameter, or wait a few seconds for the device to automatically save and exit adjustment mode.

Refer to the Specifications section for the adjustable ranges of each parameter.

7.4. Remote Control via Ewelink App

• Open the Ewelink app on your smartphone.
• Select your TOMZN circuit breaker from the device list.
• Use the ON/OFF toggle in the app to remotely control the power supply.
• The app also allows you to view волумен во реално времеtage and current, set schedules, and configure protection parameters remotely.

8. Одржување

The TOMZN TOB15-63 WiFi Smart Circuit Breaker requires minimal maintenance. Regular checks can help ensure its longevity and reliable operation.

• Визуелна инспекција: Периодично проверувајте го уредот за какви било знаци на физичко оштетување, промена на бојата или лабави врски.
• Чистење: Доколку е потребно, нежно исчистете ја надворешноста на уредот со сува, мека крпа. Не користете течни средства за чистење или растворувачи.
• Проверка на врската: Ensure all wiring connections remain tight and secure.
• Тест за функционалност: Occasionally test the manual ON/OFF switch and verify that the LCD display is functioning correctly.

9 Смена на проблеми

10. Гаранција и поддршка

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please reach out to the manufacturer or your point of purchase.