1. Вовед
Thank you for choosing the KGUSS FX-AUDIO- L06 Fully Balanced Power Amplifier. This device is designed to deliver high-fidelity audio performance with its advanced Class D amplification and balanced circuit architecture. Please read this manual thoroughly before operating the amplifier to ensure proper setup, optimal performance, and safe use.
Слика 1: Предна страна view of the KGUSS FX-AUDIO- L06 Fully Balanced Power Ampлифирач, шоуasing the VU meters and control knob.
2. Инструкции за безбедност
- Do not expose this device to rain, moisture, or extreme temperatures.
- Обезбедете соодветна вентилација околу ampлафлатор за да се спречи прегревање.
- Не отворајте го ampлифирач casing. Целото сервисирање обратете се на квалификуван персонал.
- Use only the specified power adapter or a compatible power supply that meets the voltagд и тековните барања.
- Disconnect the power supply before making any connections or disconnections.
- Чувајте го уредот подалеку од силни магнетни полиња.
3. Содржина на пакетот
Ве молиме проверете го пакувањето за следните ставки:
- 1 x KGUSS FX-AUDIO- L06 Ampживописен
- 1 x Power Adapter (standard)
- 1 x Упатство за употреба
4. Производот завршиview
4.1 Преден панел
Слика 2: Front and Rear Panel Layout with corresponding descriptions.
- ON/SEL Button: Press and hold to power on/off. Short press to switch audio sources (UNBAL/BAL).
- Level Indicator Meter (VU Meter): Displays the audio output level for the left (L) and right (R) channels.
- LED Indicator for Line Input: Illuminates when the unbalanced (RCA) input is selected.
- LED Indicator for XLR Input: Illuminates when the balanced (XLR) input is selected.
- Копче за јачина на звук: Свртете лево за да ја намалите јачината на звукот, свртете надесно за да ја зголемите јачината на звукот.
4.2 Заден панел
- Balanced XLR Signal Input (L/R): For connecting audio sources with balanced XLR outputs.
- Single-ended RCA Input (L/R): For connecting audio sources with unbalanced RCA outputs.
- 12V излез за активирање: For controlling other devices with a 12V trigger input.
- Влез за активирање од 12 V: For receiving a 12V trigger signal from another device.
- Straight-through Mode Switch (DIAL ON): When set to ON, the signal passes through without volume control, allowing an external preamplifier to manage volume.
- Meter Head Swing Switch (DIAL ON): When set to ON, the VU meters will swing. When set to OFF, the meters will be static.
- R/L Speaker Output: Connects to passive speakers (2Ω-8Ω).
- High Power DC Power Interface: Supports rated current 15A input. Requires a GX20-4 pin aviation power connector for maximum output (600W+600W).
- Conventional DC Power Interface: Supports rated current 4A input. For routine use with standard power sources.
5. Упатства за поставување
5.1 Поврзување звучници
Connect your passive speakers to the R/L Speaker Output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The L06 supports speakers with an impedance of 2Ω to 8Ω.
5.2 Поврзување на аудио извори
The L06 offers both balanced (XLR) and unbalanced (RCA) inputs. Choose the appropriate input based on your audio source device.
- Влез XLR: Use XLR cables to connect your audio source (e.g., DAC, preamplifier) to the Balanced XLR Signal Input (L/R) on the rear panel.
- Влез RCA: Use RCA cables to connect your audio source (e.g., CD player, TV BOX, smartphone) to the Single-ended RCA Input (L/R) on the rear panel.
Слика 3: Diagram illustrating various device connections and input/output wiring for the L06 ampживописен.
5.3 Поврзување за напојување
Connect the provided power adapter to the Conventional DC Power Interface (14) on the rear panel. For high-power applications requiring up to 500W+500W output, use a compatible 15A power supply with a GX20-4 pin aviation connector and connect it to the High Power DC Power Interface (13).
6. Упатства за работа
6.1 Вклучување/исклучување
Притиснете и задржете го ON/SEL button (1) on the front panel for a few seconds to power the ampпоживо вклучено или исклучено.
6.2 Избор на влез
По вклучувањето, кратко притиснете го ON/SEL button (1) to cycle between the balanced (XLR) and unbalanced (RCA) inputs. The corresponding LED indicator (3 or 4) will illuminate to show the active input.
6.3 Контрола на јачината на звукот
Adjust the audio output level using the Копче за волумен (5). Turn clockwise to increase volume and counter-clockwise to decrease volume.
6.4 VU Meter Operation
На Level Indicator Meters (VU Meters) (2) provide a visual representation of the audio signal level. Ensure the Meter Head Swing Switch (11) on the rear panel is set to 'ON' for the meters to function. If the 'Straight-through Mode Switch' (10) is 'ON', the volume knob will be bypassed, and the VU meters will reflect the input signal level without volume attenuation from the L06.
7. Клучни карактеристики
- Висока излезна моќност: Features dual TPA3255 Class D amplifier chips, delivering up to 500W + 500W into 2Ω speakers.
- Ultra-low Distortion: Utilizes TI ultra-low distortion chipset and OPA1612 operational amplifier, achieving THD <0.007% and SNR >120dB.
- Fully Balanced Circuit Design: Supports selectable balanced (XLR) and single-ended (RCA) inputs, effectively reducing interference and improving signal clarity.
- Dual Power Input Modes: Accommodates both standard power sources and high-power configurations (up to 600W+600W with a GX20-4 pin aviation power connector) for versatile use.
- Заштитно коло: Incorporates multifunctional protection circuits for enhanced device longevity and safety.
- Relay Channel Switching: Ensures smooth and reliable input source switching.
Слика 4: Visual representation of the L06's core features, including chipset, inductor, and protection.
8. Одржување
- Исчистете го amplifier's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure the ventilation slots are free from dust and obstructions to maintain proper airflow.
- Чувајте го уредот на ладно и суво место кога не го користите подолг временски период.
9 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема моќ | Кабелот за напојување не е поврзан; Приклучокот е неисправен; Ampпоживо. | Check power cable connection; Try a different outlet; Press and hold ON/SEL button to power on. |
| Нема излез на звук | Incorrect input selected; Volume too low; Speaker cables loose; Audio source issue. | Short press ON/SEL to select correct input; Increase volume; Check speaker connections; Verify audio source is working. |
| Искривен звук | Volume too high; Input signal too strong; Speaker impedance mismatch. | Reduce volume; Check audio source output level; Ensure speakers are within 2Ω-8Ω range. |
| VU meters not moving | Meter Head Swing Switch is OFF; No audio signal. | Set Meter Head Swing Switch (11) to ON; Ensure audio is playing and input is selected. |
10. Спецификации
| Параметар | Вредност |
|---|---|
| Бренд | FX-AUDIO- |
| Модел | L06 |
| Чипсет | OPA1612+TPA3255 |
| Влезови | XLR / Line in (RCA) |
| Излези | Speaker L/R |
| Фреквентен одговор | (10Hz - 24kHz) ±0.3dB |
| SNR | 120 dB |
| THD+N | <0.007% (1KHz, A-wt) |
| Power Output (THD+N<1%) | 100W+100W@8Ω 170W+170W@4Ω 300W+300W@2Ω |
| Power Output (THD+N<10%) | 150W+150W@8Ω 300W+300W@4Ω 500W+500W@2Ω |
| Материјал за домување | Алуминиумска легура |
| Изглед | Sandblasting oxidation |
| Тежина на производот | 1440 г (приближно 3.17 фунти) |
| Големина на производот (L*Ш*В) | 200мм * 178мм * 45мм (приближно 7.87 x 7.01 x 1.77 инчи) |
11. Гаранција и поддршка
Warranty information for the KGUSS FX-AUDIO- L06 amplifier is typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or service inquiries, please contact your retailer or the manufacturer directly.
