ATK Blazing Sky F1 V2 Wireless Gaming Mouse User Manual

Вовед

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ATK Blazing Sky F1 V2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.

Image: The ATK Blazing Sky F1 V2 Wireless Gaming Mouse, showcasing неговиот ергономски дизајн.

Поставување

1. Распакување и почетна наплата

Carefully remove the mouse and all accessories from the packaging. Before first use, it is recommended to fully charge the mouse.

• Connect the provided USB-C cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
• The charging indicator light will show the charging status. Refer to the LED indicator section for details.
• For F1 V2 Extreme models, fast charging requires a USB 3.0 port and the original USB data cable.

Image: Illustration of the high-density battery inside the ATK F1 V2 mouse, highlighting its capacity and fast charging capabilities.

2. Режими на поврзување

The ATK Blazing Sky F1 V2 supports three connectivity modes: 2.4G Wireless, Bluetooth, and Wired.

2.1. 2.4G безжична врска

1. Locate the 8K Nano or GEM dongle included with your mouse.
2. Приклучете го клучот во достапна USB порта на вашиот компјутер.
3. Вклучете го глувчето користејќи го прекинувачот за напојување лоциран на дното.
4. The mouse should automatically connect to the dongle. If not, press the pairing button (if available) or refer to the software for pairing instructions.

Image: The ATK F1 V2 mouse alongside its new GEM 8K dongle, illustrating the wireless connection component.

2.2. Bluetooth Connection (V2 Ultra Max)

1. Проверете дали Bluetooth-от на вашиот компјутер е овозможен.
2. Switch the mouse to Bluetooth mode using the switch on the bottom of the mouse.
3. Press and hold the Bluetooth pairing button (if applicable) until the indicator light flashes, indicating pairing mode.
4. On your computer, search for Bluetooth devices and select "ATK F1 V2" to connect.

2.3. Жична врска

1. Connect the provided USB-C cable to the mouse's front port.
2. Connect the other end of the USB-C cable to a USB port on your computer.
3. Глувчето автоматски ќе се префрли во жичен режим и ќе почне да се полни.

3. Software Installation (ATK HUB)

For advanced customization, including DPI settings, button remapping, macro creation, and polling rate adjustments, download the ATK HUB software from the official ATK webстраница. Следете ги упатствата на екранот за инсталација.

Упатства за работа

1. Вклучување/исклучување

Use the switch on the bottom of the mouse to turn it ON or OFF. Turning the mouse off when not in use conserves battery life.

2. Прилагодување на DPI

The mouse features a dedicated DPI button (usually located on the top or bottom) to cycle through preset DPI levels. You can customize these levels using the ATK HUB software.

• PAW3395Ultra Sensor: 100-30,000 DPI.
• PAW3950Ultra Sensor: 10-30,000 DPI (adjustable in 10-step precision, overlockable up to 42,000 DPI).

Слика: Крупен план view of the PAW3950 Ultra Flagship Sensor, illustrating its advanced tracking capabilities.

3. Стапка на гласање

The ATK F1 V2 supports Wired/Wireless Dual 8000 Hz polling rate for instant tracking. This can be configured via the ATK HUB software.

4. Програмабилни копчиња

The mouse features multiple programmable buttons. Use the ATK HUB software to assign custom functions, macros, or shortcuts to these buttons for enhanced control.

Image: Diagram showing the ATK Self-Developed 54 Series ApexShark MAX Mouse Solution with the Nordic 54 Series MCU, highlighting its high-speed processing.

Одржување

1. Чистење

The ATK F1 V2 features an All-New Nano Coating, making it sweat-resistant, stain-resistant, and easy to clean.

• Користете мека, сува крпа без влакненца за да ја избришете површината на глувчето.
• За тврдокорна нечистотија, малку дampmk крпата со вода или благо, неабразивно средство за чистење.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the coating and internal components.
• Regularly clean the optical sensor area on the bottom of the mouse with a cotton swab to ensure accurate tracking.

Image: Visual representation of the All-New Nano Coating on the ATK F1 V2 mouse, emphasizing its sweat-resistant and easy-to-clean properties.

2. Нега на батерии

• За да го максимизирате животниот век на батеријата, избегнувајте често целосно празнење на батеријата.
• Наполнете го глувчето со помош на испорачаниот USB-C кабел.
• Чувајте го глувчето на ладно и суво место кога не го користите подолг период.

Решавање проблеми

1. Глувчето не реагира

• Проверете ја батеријата: Ensure the mouse is charged. Connect it via USB-C cable to check if it powers on.
• Проверете ја поврзаноста:
  • 2.4G безжична мрежа: Ensure the dongle is securely plugged into a working USB port and the mouse is in 2.4G mode. Try a different USB port.
  • Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is correctly paired and in Bluetooth mode. Try re-pairing.
  • Wичен: Ensure the USB-C cable is securely connected to both the mouse and the computer.
• Циклус на напојување: Turn the mouse off, wait a few seconds, then turn it back on.
• Рестартирајте го компјутерот: Sometimes a computer restart can resolve connectivity issues.

2. Inconsistent Tracking or Cursor Lag

• Чист сензор: Dust or debris on the optical sensor can cause tracking issues. Clean the sensor area on the bottom of the mouse.
• Површина: Ensure you are using the mouse on a suitable surface. Highly reflective or uneven surfaces can affect tracking. A quality mouse pad is recommended.
• Пречки: In wireless modes, other wireless devices might cause interference. Try moving the dongle closer to the mouse or using a USB extender.
• Стапка на анкети: Ensure the polling rate is set appropriately for your system. Very high polling rates (e.g., 8K Hz) might require sufficient CPU resources.
• Софтвер: Check the ATK HUB software for any sensor calibration options or firmware updates.

3. Копчињата не реагираат

• Конфликт на софтвер: Ensure no other software is interfering with mouse button assignments.
• Ресетирајте ги поставките: Use the ATK HUB software to reset button assignments to default.
• Physical Check: Inspect buttons for any physical obstruction or damage.

Спецификации

The ATK Blazing Sky F1 V2 series offers several models with varying specifications:

Image: Detailed product specifications table comparing the F1 V2 Ultra Max, Ultimate, and Extreme models.

Гаранција и поддршка

ATK products are designed for durability and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official ATK webсајт.

Поддршка за корисници

If you encounter any issues or have questions not covered in this manual, please contact ATK customer support through their official webвеб-страницата или информациите за контакт наведени во документацијата за вашиот производ. Можете исто така да ја посетите ATK Store on Amazon за дополнителни ресурси.