AtomStack F03-0329-0AA1 Swift

Спецификации

• Име на производ: AtomStack Swift
• Број на модел: F03-0329-0AA1
• Верзија: B
• Влез на енергија: DC 24V
• Пристаништа: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Индикатор за статус: Solid blue when working

Упатство за употреба на производот

Список на делови:

• Склопување на X-оската
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Адаптер за напојување
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Список на делови

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Забелешка: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Забелешка:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Метод на фокусирање:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Совет:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Computer Software Download Method:
AtomStack Studio download link: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Скенирајте за преземање

Софтверски ресурси

LightBurn
Unofficial software. Requires a separate purchase

Lightburn Software Download Method: Download link: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Open the LightBurn software, select: Devices – Import
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Забелешка: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Упатство за употреба

Контактирајте со нас

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Решавање проблеми
• Одржување

Услуга за клиенти:

• For the detailed warranty policy, please visit our official webсајт: www.atomstack.com
• За техничка поддршка и услуга, ве молиме е-пошта: support@atomstack.com

Производител:
Шенжен AtomStack Technologies Co., Ltd.

Поштенски код: 518172

Адреса:
17-ти кат, зграда 3А, фаза II, интелигентен парк, бр. 76, авенија Баохе, улица Баолонг, округ Лонганг, Шенжен, Гуангдонг, Кина.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

Најчесто поставувани прашања

Што треба да направам ако наидам на проблеми при инсталацијата?

If you face any difficulties during installation, refer to the video tutorial available on the official webсајт или контактирајте со поддршката за корисници за помош.

Документи / ресурси

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Упатство за користење F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Референци

• Упатство за употреба