GRID BROWS LED Brows
ПРЕД ДА ПОЧНЕТЕ
Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).
Веѓи
Карактеристики
- CFRP enclosures
- 2x 9 RGB LEDs
- RaceDirector compatible
Carbon fiber mounting brackets
Mounting the brows
To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). 
Во овој ексample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.
Connecting the brows
As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box. 
RaceDirector
- Download and install the lastest version of RaceDirector from www.sim-lab.eu/srd-setup
- For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
- Сега ќе ги разгледаме основите за да започнеме со користење на RaceDirector за да ве доведеме на вистинскиот пат што побрзо. Навистина ве повикуваме да го разгледате прирачникот за подлабоко објаснување за можностите што RaceDirector ги нуди.
- Прво треба да го активираме производот, тоа се прави на страницата „Поставки“ (1).
- Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.
Страници на уредот
These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.
LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. 
The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.
FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.
RaceDirector ги следи тековните верзии на фирмверот. Кога ќе открие разлика, известување 
ќе ве извести дека е откриен понов фирмвер. 
When an updated firmware version has been detected, please follow the instructions and click the ‘Perform update’ (1) button.
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.
Older devices might still require the former firmware update tool. In that case, RaceDirector will tell you what to do.
Поддршка за Simhub
For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. 
Промена на функциите на LED диодите.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. 
Треба да има доволно информации во дадениот стандарден LED проfiles да може да ги прилагодите поставките за LED по ваш вкус. За да започнете да градите свој професионалецfile, предлагаме да копирате постоечка и да смените каде што е потребно. Напредокотtagе секогаш имате резервна копија од стандардниот проfile да се врати назад на.
Забелешка: за проблеми/решавање проблеми со вашиот Simhub profiles, ве молиме погледнете ја документацијата на Simhub или поддршката на Simhub.
Бил на материјали
| ВО КУТИЈАТА | |||
| # | Дел | Количина | Забелешка |
| A1 | Веѓа | 2 | |
| A2 | Контролна кутија | 1 | Interface to PC. |
| A3 | Монтажна заграда | 2 | |
| A4 | USB-A кабел | 1 | |
| A5 | Brow cable long | 1 | Use between brows. |
| A6 | Brow cable short | 1 | |
| A7 | Завртка M5 X 14 DIN 7380 | 2 | |
| A8 | Завртка M5 X 8 DIN 7380 | 4 | |
| A9 | Слот-Орев М5 | 4 | |
Повеќе информации
Ако сè уште имате прашања во врска со склопувањето на овој производ или во врска со самиот прирачник, ве молиме погледнете го нашиот оддел за поддршка. До нив може да се дојде на: support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord
Документи / ресурси
 |
GRID BROWS LED Brows [pdf] Упатство за употреба VERSION 1.3, BROWS LED Brows, BROWS, LED Brows, Brows |