Рот-логото

Roth QuickTemp Compact System

Roth-QuickTemp-Compact-System-Product

Спецификации на производот

  • Димензии: 61 cm x 61 cm x 40 cm
  • Maximum load: 2mm per meter
  • Потребно е собрание

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Усисајте го подлогата. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Жлебовите меѓу плочите мора да бидат порамнети.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Користете преносни плочи за доводни цевки/за пополнување на празнините.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Инсталирајте ја цевката цврсто/блиску до внатрешниот круг во вртења.

Roth-QuickTemp-Compact-System-Fig- (11)

Инсталирајте цевки и извршете тест за притисок.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Чекори за инсталација

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Check for stability and make adjustments if necessary.
  8. Your product is now ready for use!

Најчесто поставувани прашања

Која е максималната носивост на производот?

The maximum load capacity is 2mm per meter.

Дали ми требаат дополнителни алатки за склопување?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Може ли производот да се расклопи за складирање?

Yes, the product can be disassembled following the reverse order of the installation steps.

Документи / ресурси

Roth QuickTemp Compact System [pdf] Водич за инсталација
QuickTemp Compact System, QuickTemp, Compact System, System

Референци

Оставете коментар

Вашата адреса за е-пошта нема да биде објавена. Задолжителните полиња се означени *